Basic steps for boiling water bath canning b
1 servings
Ingredients
Quantity | Ingredient | |
---|---|---|
-continued |
Directions
BOILING WATER BATH CANNING
10. As each jar is filled, place it in the canner. Arrange the jars on the rack so that they don't touch one another or bump against the side of the canner. Add hot water to cover the jars with one or two inches of water.
11. Cover the canner, and, when water returns to a full, rolling boil, begin timing for processing. Adjust heat during the processing so that the water boils gently but steadily. If the processing time is over 10 minutes, you may need to add additional boiling water to keep the jars covered. If you live above 1,000 feet above sea level, you'll need to make adjustments in the processing time according to the Altitude Adjustment for Boiling Water Bath Canner chart.
12. When the processing time is up, turn off the heat and carefully lift the jars STRAIGHT UP, DO NOT TIP, out of the canner. Place the jars several inches apart on a folded towel or rack that is in an out of the way, draft free place. Don't tighten bands after processing.
13. Let the jars cool, undisturbed, for at least 12 hours. You will hear a light pinging sounds as the jars seal as they cool. Don't cover the jars while they are cooling.
14. When the food in the jars is completely cool, remove the screw bands and check the seals. The lids should be depressed and, when the jar is tipped, there should be no leakage. If the center of the lid can be pushed down and comes back up, or if there are any leaks, use the food immediately (store it in the refrigerator). Or, pour it into another clean, hot jar, seal with a new lid, put the screw band on, and reprocess.
15. Wipe the jars with a clean, damp cloth, then label clearly with the contents, date, batch (if you do more than one a day), hot or cold pack method, seasoning, and/or special ingredients or information.
16. Be sure to remove the screw bands, if they are left on, they could rust in place. To remove stuck screw bands, wring out a cloth in hot water, then wrap it around the band for a minute or two to help loosen it. Clean and dry the bands and store them in a sealed plastic bag in a dry place.
17. Store the jars in a cool, dark, dry place where they won't freeze. You can put jars in the boxes they came in to protect them from light.
18. Before using, check for signs of spoilage. If you notice bulging or unsealed lids, spurting liquid, mold, off odor, or slimy food, do not use. Discard the food where humans and animals can't get to it.
You can salvage the jars, however. Wash them thoroughly, rinse, and then boil for 15 minutes.
19. As a further precaution, you may want to heat home canned foods to boiling, cover, and boil 15 to 20 minutes more. If the food foams, smells bad, or shows other signs of spoilage, discard it.
Source: Vegetable Gardening Encyclopedia Typos by Dorothy Flatman 1995 Submitted By DOROTHY FLATMAN On 10-04-95
Related recipes
- About canning
- Additional basic canning equipment
- Basic canning equipment
- Basic canning techniques
- Basic steps for boiling water bath canning a
- Basic steps for steam pressure canning a
- Basic steps for steam pressure canning b
- Boiling water bath canning overview
- Canning soybeans
- Canning tomatoes
- Canning vegetables 1
- Choosing the right canning method
- Filling your canning jars properly
- Handling canning jars and lids
- Hot water bath basics
- How canning preserves foods
- How to prevent problems in canning
- Preparing soups for canning
- Steam pressure canning overview
- Why and what of canning